MALAYSIA
 
  Products and Solutions  
      Roofing & Walling
      Pre-Engineered Buildings
      Structural Decking
      Framing & Trusses
      Purlins & Girts

 
  Warranty and Research  
      Product Warranty
      Material Warranty
      Research & Development
 
   
 
     
LYSAGHT® ZIPDEK®
 
High-ribbed standing seam profile   LYSAGHT<sup>®</sup> ZIPDEK<sup>®</sup>
 

 

 
 

LYSAGHT® ZIPDEK®

 

 

High-ribbed Standing Seam

 
 

       
 

LYSAGHT® ZIPDEK® steel roofing profile is a high-ribbed standing seam architectural profile that is set to meet the requirements and specifications of architecturally demanding applications. Its bold lines and uncommon flexibility enable virtually any roofing design to be constructed.

A concealed-fixed and high-ribbed roofing profile provides excellent water-tightness and resistance to wind uplift. The rigidity of the seam with specially designed brackets clamped over the formed seam allow easy installation of flat architectural panels onto finished roof system.

LYSAGHT® ZIPDEK® steel roofing profile can be used as a single skin or double skin roof system depending on the acoustic requirements of the building.

Optimal corrosion protection is assured by its steel quality resulted from BlueScope Steel’s proprietary premium Clean COLORBOND® steel and ZINCALUME® steel .

 

Physical Properties

 LYSAGHT® ZIPDEK®

Standard

 Base Metal Thickness (BMT)

0.55 mm

 Total Coated Thickness (TCT)

0.60 mm

 Effective Cover Width

415 mm

 Rib height

65 mm

 Grade of Steel (mPa)

G300 ZINCALUME® steel (300N/mm2  yield strength)

 Min Recommended Roof Pitch
     Sheet Length without end lap
     Sheet length with end lap


2°  (1 in 29 approx.)
3°  (1 in 20 approx.)

 Coating Class (min)

ZINCALUME® AZ150 steel (150g/m2

 Custom Cut Lengths

Any measurement to a maximum transportable length

 

Suggested Specifications for LYSAGHT® ZIPDEK® in Extreme Environments

 Marine Environment

Moderate

Severe

 Total Coated Thickness  (TCT)

0.60mm

0.61mm

 BlueScope’s Proprietary  Pre-painted Steel System

Clean COLORBOND® steel
or Clean COLORBOND® XPD steel or Clean COLORBOND® XPD Pearlescent steel

Clean COLORBOND® ULTRA steel

 Steel Grade

G300 (Min Yield Strength of 300mPa)

G300 (Min Yield Strength of 300mPa)

 Minimum Coating Mass of  ZINCALUME® steel

AZ150 (150g/m2 )

AZ200 (200g/m2 )

Wind Uplift Capacities of LYSAGHT® ZIPDEK®  Profile

 Base Metal Thickness (BMT)

Material

Description Severe

 0.55

Steel

The typical span range for LYSAGHT ZIPDEK system is 0.9m to 1.2m considering normal design conditions.


Warranty
BlueScope Steel offers a warranty (subject to environmental conditions) for Clean COLORBOND® steel and  ZINCALUME® steel of up to 20 years from the date of installation against perforation by weathering in the natural elements.


Warnings 
Lead and copper are not recommended for use with Clean COLORBOND® steel or ZINCALUME® steel as contact with these metals can cause accelerated corrosion. Minimum recommended roof pitch is 1°. Direct contact should therefore be avoided.  When inside condensation conditions are likely, coated steel girts should be used, to avoid any ZINCALUME® steel contact to bare steel.

A full list of the guidelines for the use of Clean COLORBOND®  steel and ZINCALUME® steel can be found in the "How To" section of this webs.




If you are working at height 2 metres and above, you must wear a safety harness with a shock absorbing twin tail lanyard attached to either a life line or an anchorage point.




 

 

 

 
 

You may like to know other profiles available in BlueScope Lysaght Malaysia Roofing & Walling Solutions :-

 
LYSAGHT<sup>®</sup> 360 SEAM<sup>™</sup> LYSAGHT® 360 SEAM
Lightweight-engineered standing profile
 [more]
  LYSAGHT® 360 SELECT SEAM
Concealed fastened roof system
 [more]
LYSAGHT<sup>®</sup> BORNEO TILE<sup>®</sup> LYSAGHT® BORNEO TILE®
Concealed fix steel roof tiles
 [more]
LYSAGHT<sup>®</sup> PRESTIGE<sup>®</sup> PANEL II LYSAGHT® PRESTIGE® PANEL II
Contemporary Panel-like Walling
 [more]
LYSAGHT<sup>®</sup> SPANDEK<sup>®</sup> OPTIMA™ LYSAGHT® SPANDEK® OPTIMA™
Trapezoidal Steel Cladding
 [more]
LYSAGHT<sup>®</sup> STYLEDEK<sup>®</sup> LYSAGHT® STYLEDEK®
Steel roofing tile panels
 [more]
LYSAGHT<sup>®</sup> TRIMDEK<sup>®</sup> OPTIMA™ LYSAGHT® TRIMDEK® OPTIMA™
Subtle Square fluted steel cladding with extra-wide span
 [more]
  Print this page
     
 
BlueScope Steel Websites
 
     
  
 
Area of Interest
 E-Newsletter Issue 2
 
e-Bulletin
Name
Email
  
 
  Did You Know   
  Although vehicle weight has been reduced significantly over the years, safety has actually improved, thanks to lightweight, high strengths steels.  
 
 
    Terms & Conditions Privacy Policy